6" Galvanized Landscape Staples – 11 Gauge U-Shaped Sod Pins
Super Geotextile landscape staples are 6" U-shaped sod pins made from galvanized 11 gauge steel. Two legs grab the ground for a strong hold on weed barrier, landscape fabric, sod, irrigation tubing and more.
- 11 gauge galvanized steel – thick, rust resistant staples that don’t fold over like thin wire.
- 6" long, 1" wide – two legs for extra holding power.
- Square-shouldered U shape – holds fabric flat and is easy to push in by hand or tap with a mallet.
- Bulk value – 100 pack (about $0.18 each) or 1000 pack (about $0.12 each).
What they’re used for
- Landscape fabric & weed barrier
- Woven and non woven geotextile (driveways, French drains, under rock and rip-rap)
- Erosion control blankets and straw mats
- Drip line and irrigation tubing
- Artificial turf and sod
- Garden netting, ground cover, pet fencing and chicken wire
Choose your pack size
| Pack | Best for | Approx. cost per staple |
|---|---|---|
| 100 Pack | Garden beds, small fabric jobs, drip line | $0.18 |
| 1000 Pack | Contractors, long fabric runs, sod and turf installs | $0.12 |
Prefer a round head that won’t tear fabric? See our circle top landscape pins.
How many do I need?
A common rule of thumb: one every 3–5 feet along the edges and down any seams or overlaps. On slopes, in windy spots, or under erosion blankets, go to every 1–2 feet. Example: a 3' x 100' roll stapled every 3 feet along both edges uses about 70 – so a 100 pack covers one roll with a few to spare. Always follow the fabric or blanket maker’s spec if one is given.
Made to go with Super Geotextile fabric
We recommend these for our own woven geotextile, non woven geotextile and weed barrier fabric – add them to your fabric order so the whole job ships together.
FAQ
What gauge are these?
11 gauge galvanized steel.
How big are they?
6 inches long and 1 inch wide.
Will they rust?
They’re galvanized to resist rust.
